PS3 Jailbreak 4.85 OFW to CFW

by Shaaz (Admin)
24 comments

You will be very happy to have this information, as it was possible to convert PS3 OFW 4.84 to CFW 4.84. After the Sony PS3 4.85 live update, it is now possible to convert PS3 OFW 4.85 to CFW 4.85. I do not know how much Serious you take on Jailbreak 4.85 or any jailbreak process of any firmware. But here your attention is very important. When anything is understood, it becomes easy. But until it is known, it remains a difficult task.

PS3 Jailbreak 4.85 is easy process but also sensitive. Because one of your mistakes can brick your PS3 console. The chances of being repressed are very less. So, activate your awareness here and read this article carefully. First of all, the conversion process of PS3 OFW 4.85 to CFW 4.85 does not support every PS3 console model. In the PS3 Jailbreak Compatibility List, you will know whether your console model supports this process or not. Secondly, you must have heard about PS3 MinVer. So also you have to check whether your console remains under 3.55 or not. You will get all that process below. If you are wondering can I convert my PS3 fat model OFW to CFW. The answer is quite simple, of course you can.

Some of you will have PS3 slim models. So you can also slim convert it but with limited models. So you have to check the model in the PS3 jailbreak compatibility list. Now the question arises whether the PS3 Super Slim can also be converted? So, remove this thing from your mind and if you do not want to brick your PS3 console, then do not follow this process at all. Every console model of PS3 gets jailbreak in today’s time, but the methods are different. You can not install CFW on your console, but you can jailbreak your PS3 Super Slim 4.86. As I have mentioned earlier, after PS3 4.82 firmware, before applying any jailbreak, PS3 HFW installation process is necessary. In my previous article, I have written about PS3 HFW 4.85. So let’s start our jailbreak process.

PS3 Jailbreak 4.85 OFW to CFW installation introduction

  1. Extract all the required files on your computer desktop or any specific folder.
  2. Plug your USB drive on your PC and format with FAT32. (SD card formatter is recommended)
  3. Create a root folder on your USB drive PS3>UPDATE.
  4. Copy PS3 HFW 4.85.1 and paste it under UPDATE folder.
  5. Plug your USB drive on your PS3 console second port.
  6. Go to system update.
  7. Choose update via USB storage and follow the installation introduction.
  8. Copy 4.85 HTML files and paste them into MiniWeb>htdocs folder.
  9. Copy 4.85 USB files, flash_485.hex and paste them into USB root folder.
  10. Run MiniWeb as administrator.
  11. Plug your USB drive on your PS3 and open internet browser.
  12. Clear your browser cache, cookies, authentication etc and restart PS3 internet browser.
  13. Go to tool>homepage and type your MiniWeb IP address in homepage tab.
  14. Go to homepage and open index_nor or index_nand. (Check NOR/NAND on PS3 Jailbreak Compatibility list)
  15. Click on Initialize exploitation
  16. Once you got success message. Click on Patch NOR/NAND flash memory.
  17. Reboot your PS3 console to apply new changes.
  18. Go to your put PS3 CFW file on USB UPDATE folder.
  19. Plug your USB drive on your PS3 second port and go to update.
  20. Choose update via storage media and follow the screen installation introduction.

Only 20 steps have been written above which you have to follow carefully. If you follow, congresses by now, your console must have been jailbreak as well. More questions arise in this jailbreak process according to other jailbreaks. So, I’m gonna leave some FAQs down below, I hope you’ll find your answer.

FAQs

I’m on 4.84 OFW/HFW, Can I install directly PS3 HFW 4.85.1?

Yes, you can, but it’s not recommended. If you install HFW directly. Then you have to install it twice. If you don’t, then you may have to face problems of freezing the PS3. First of all, you have to install 4.85 OFW, whether you choose to do that USB or from the Internet.

I’m getting PS3 Update 8002F957 error message. What should I do?

Mainly we have just followed the above 20 steps. That is to fix this error (8002F957). See all the steps once again and follow.

You’ll need these

Conclusion – In this article, I mentioned almost everything that you should know about PS3 Jailbreak 4.85 OFW to CFW converting process. If something else or you have any question or query regarding this article. Feel free to leave a comment in the comment section. Like my Facebook page and subscribe to YouTube channel and stay connected with me.

You may also like

24 comments

kevin November 6, 2019 - 5:06 pm

Shaz, I have followed all instructions, but when I compared the compatibility list of my PS3 super slim CECH-4303C on https://www.smartgametech.com/ps3-compatibility-list-cfw-ofw-installer/ it is mention that it is NOR supported, but however in the http://ps3xploit.com/hfw/writer/index_nor.html it has not mention about any super slim PS3. Do you think I will brick my super slim PS3 CECH-4303C during that process?

Shaaz (Admin) November 16, 2019 - 10:34 am

You are safe. This is my self made compatibility list. You are good to go with HFW/Exploit installer. Do not try any HFW process.

Kogut1975 January 7, 2020 - 7:45 pm

Hello. I do not know English but it seems that in the film you are missing point no. 9. Why?

Shaaz (Admin) January 13, 2020 - 5:21 pm

No I’m not. Use translator

Kogut1975 January 10, 2020 - 11:03 am

Hello. After entering the numbers from the miniweb on the console, the console does not connect to this page as in the movie. On PC, when I enter the host number in the browser, it’s ok. Please help !!!

Shaaz (Admin) January 13, 2020 - 5:20 pm

Can you please explain more

IronNash January 27, 2020 - 2:10 am

I did all the steps, i successfully replaced my nand flash, and still getting the error 8002F957 at 70% when trying to install rebug or overflow

Shaaz (Admin) January 27, 2020 - 7:44 am

do you have flesh_hex file on your USB root folder?

LEVY YONLI February 19, 2020 - 3:21 pm

BONSOIR MR je m’appelle levy j’ai une ps3 ultra slim mais vers l’installation du Nor dont je suis compatible ma Ps3 refuse de s’allumer je ne sais pas comment y rem├ędier s’il vous plait si vous avez une solution dite le moi.

Shaaz (Admin) February 22, 2020 - 7:46 am

English please

LEVY YONLI February 22, 2020 - 12:12 pm

SORRY if i speak bad english . I have a ps3 ultra slim, but my ps3 can’t open after the installation of nor. Please if you have a solution tell me.

LEVY YONLI February 22, 2020 - 12:14 pm

SORRY if i speak bad english . I have a ps3 ultra slim, but my ps3 can’t open after the installation of nor. Please if you have a solution tell me.THANK YOU

amu March 19, 2020 - 6:45 pm

Please password for the file

Shaaz (Admin) March 20, 2020 - 12:51 pm

Pass: Smart Game Tech

omer March 21, 2020 - 12:48 pm

I am not got success message point no.14 Knowing My device model is CECH-25xxA

Shaaz (Admin) March 27, 2020 - 2:27 pm

Clear cookies, cache and try again with different internet connection.

nile17 March 24, 2020 - 1:56 pm

Sorry Shaaz, im getting a problem with the html files, on this case index_nor or index_nand doesn’t show up

Shaaz (Admin) March 27, 2020 - 2:27 pm

Did you put those files on htdocs folder?

Nate Perez March 30, 2020 - 2:41 am

where is the download stuff at

Shaaz (Admin) March 31, 2020 - 10:56 am

In the section, you’ll need this

supadups March 30, 2020 - 2:43 am

Hi Shaaz, I am on 4.85 OFW and want to install 4.85 CFW. I have a PS3 slim (model # cech2501b). I noticed in your video the file you copied to your ps3/update folder was around 5 MB KB but the one I downloaded was 200 MB. I just want to make sure I am following instructions correct because I dont want to brick my PS3. Also in step #4 above it says to Copy PS3 HFW 4.85.1 and paste it under UPDATE folder but the file inside the .zip file I downloaded is HFW 4.85.1 PS3UPDAT.PUP and not PS3 HFW 4.85.1. I just want to make sure I downloaded the correct file before I do anything else. Thanks for your help and putting this tutorial together!

Shaaz (Admin) March 31, 2020 - 10:56 am

First you need to check your PS3 compatibility with MinVer same as you update your PS3. If you got message on your screen below 3.55 then you can easily install HFW 4.85.2 or 4.85.1. Once you installed HFW on your PS3 then you can go with further steps.

supadups March 31, 2020 - 9:42 pm

I will give it a try. Thanks for the reply!

supadups April 4, 2020 - 4:34 pm

Hi Shaz, there is no index_nor or index_nand file in the 485_html_files.zip file. There are only the files below. I have a NOR supported system (CECH 2501b) so Im not sure if I should launch the han_enabler or han_installer files instead? Here is the file listing of the zip file:

2019-09-17 08:50 PM .
2019-09-17 08:50 PM ..
2019-08-31 02:06 AM 9,443 actidps_dumper.html
2019-08-31 02:06 AM 9,713 actrif_copier.html
2019-08-31 02:05 AM 6,252 dbgpkg_enabler.html
2019-08-31 02:05 AM 7,285 han_enabler.html
2019-08-31 02:05 AM 15,268 han_installer.html
2019-08-31 02:08 AM 73,097 ps3xploit_v302.js
6 File(s) 121,058 bytes
2 Dir(s) 4,050,784,256 bytes free

Leave a Comment

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More